Valid Statistical Rationales for Sample Sizes

This webinar provides guidance on how to justify such sample sizes, and thereby indirectly provides guidance on how to choose sample sizes.

John N. Zorich
Instructor:
John N. Zorich
Duration:
90 Minutes
Product Id:
502505
Access:
6 months

More Trainings by this Expert

Price Details
$190 Recorded
$390 Corporate Recorded
Price Detail Options
Overview:

This webinar explains the logic behind sample-size choice for several statistical methods that are commonly used in verification or validation efforts, and how to express a valid statistical justification for a chosen sample size.

The statistical methods discussed during the webinar include the following:

  • Confidence intervals
  • Process Control Charts
  • Process Capability Indices
  • Confidence / Reliability Calculations
  • MTBF Studies ("Mean Time Between Failures" of electronic equipment)
  • QC Sampling Plans

Why should you Attend: Almost all manufacturing and development companies perform at least some verification testings or validation studies of design-outputs and/or manufacturing processes, but it is sometimes difficult to explain the rationale for the sample sizes used in such efforts. This webinar provides guidance on how to justify such sample sizes, and thereby indirectly provides guidance on how to choose sample sizes. Those justifications can then be documented in Protocols or regulatory submissions, or can be given to regulatory auditors who may ask for them during onsite audits at your company. Thus, this webinar is designed to help you avoid regulatory delays in product approvals and to prevent an auditor from issuing you a nonconformity.

NOTE: This webinar does not address rationales for sample sizes used in clinical trials.

Areas Covered in the Session:
  • Introduction
    • Examples of regulatory requirements related to sample size rationale
    • Sample versus Population
    • Statistic versus Parameter
  • Rationales for sample size choices when using
    • Confidence Intervals
      • Attribute data
      • Variables data
    • Statistical Process Control C harts (e.g., XbarR)
    • Process Capability Indices (e.g., Cpk )
    • Confidence/Reliability Calculation
      • Attribute data
      • Variables data (e.g., K-tables)
    • Significance Tests ( using t-Tests as an example )
      • When the "significance" is the desired outcome
      • When "non-significance" is the desired outcome (i.e., "Power" analysis)
    • AQL sampling plans
  • Examples of statistically valid "Sample-Size Rationale" statements

Who Will Benefit:
  • QA/QC Supervisor
  • Process Engineer
  • Manufacturing Engineer
  • QA/QC Technician
  • Manufacturing Technician
  • R&D Engineer


Speaker Profile
John N. Zorich has spent almost 40 years in the medical device manufacturing industry; the first 20 years were as a "regular" employee in the areas of R&D, Manufacturing, QA/QC, and Regulatory; the next 15 years were as a consultant in the areas of QA/QC and Statistics. These last few years were as a trainer and consultant in the area of Applied Statistics only. His consulting clients in the area of statistics have included numerous start-ups as well as large corporations such as Boston Scientific, Novellus, and Siemens Medical.

His experience as an instructor in applied statistics includes having given annual 3-day seminars for many years at Ohlone College (San Jose CA), and previously having given that same course for several years for Silicon Valley ASQ Biomedical. He's given numerous statistical seminars at ASQ meetings and conferences. And he creates and sells validated statistical software programs that have been purchased by more than 110 companies, world-wide.




Your Recently Viewed Webinars

Payment Methods

Contact Us

NetZealous LLC,
39658 Mission Boulevard, Fremont,
CA 94539, USA.

Information

  Refund Policy
  +1-800-447-9407
  Fax: 302 288 6884
  support@compliance4All.com